Hotwash Cleaning Systems
A low pressure, high temperature system, giving you a thorough but gentle clean without compromise.
The PH Cleantec Hotwash Cleaning System is environment and resource-friendly, as well as cost-efficient, due to it being able to recirculate the cleaning liquid. The Hotwash units are mobile and have an integrated 60-litre tank which can be filled with water or cooling lubricant (stainless steel units can also be operated with deionised water and acids). If necessary, cleaning concentrate can be added to the Hotwash units.
Because of this, the PH Cleantec Hotwash Sytstem can be used for many applications:
Cleaning small and large parts
From precision parts used in watch making, to 10 ton motors.
- Our Hotwash cleaning devices operate at low pressures of up to 14 bar and high temperatures up to 95°C, making them ideal for cleaning greasy and oily parts, as well as complex surfaces.
- Cleaning is performed with water, and an alkaline cleaning agent can be added if necessary. Deionised water or acids may be used depending on the application.
- The high temperature dissolves contaminants efficiently, while the low pressure safely removes dirt without damaging parts.
- Various Hotwash nozzles allow for the effective cleaning of complex surfaces, including cracks, grooves, and deep cavities, without leaving residues.
- For residue-free cleaning, especially in sensitive applications, our stainless steel Hotwash units can use deionised water or acids, making them suitable for medical, precision, and industrial uses.
Cleaning tooling machines
These can even be cleaned with their own cooling lubricant or cutting oil if required. Benefits include:
- Less working time: Customers report 80-90% less working time
- Easy cleaning of difficult areas such as tool magazine, spindle or electric cables
- No introduction of foreign substances, additives or chemicals, as cleaning is done with own coolant lubricant or own cutting oil
- No additional costs for chemicals or disposal
- Pleasant to work with – simple spraying with spray lance instead of tedious manual scrubbing
Our Hotwash Machines
Accessories
Spray accessories
Parts Cleaning
Article No. Standard / Stainless Steel |
Description | Image |
---|---|---|
SR-BS / ESR-BS |
Retrofit Kit: Spray gun with quick change coupling device, 2m spray hose with heat protection and plug nipple. In stainless steel version fixed tight, without nipple! |
|
SR-ST / ESR-ST |
Standard jet nozzle with protective cap Flat fan with 25° L= 225mm From 2021 part of standard equipment of devices (of series SR) |
|
SR-IR / ESR-IR |
Slim nozzle for deep holes Flat fan with 25° L= 210mm |
|
SR-HO / ESR-HO |
Hollow cone nozzle for tubes and blind holes Fan with 120° angle L= 195mm |
|
SR-SL / ESR-SL |
Rigid, thin nozzle for blind holes and tubes Diffused jet D= 4 mm, L= 245 mm |
|
SR-ES / ESR-ES |
Rigid, thin nozzle for blind holes and collectors of electrostatic filters. 4 diffused jets at 90° angle D= 5 mm, L= 355 mm |
|
SR-FX / ESR-FX |
Flexible nozzle for holes and tubes 2 diffused jets at 180° angle L= 510 mm |
|
SR-PT / ESR-PT |
Needle jet nozzle with protective cap for stubborn grime Jet diameter ~ 1 mm L= 225 mm |
|
SR-PI / ESR-PI |
Synthetic brush-nozzle for surfaces L= 140 mm |
|
SR-PIE / ESR-PIE |
Stainless steel brush-nozzle for stubborn grime L= 125 mm |
|
SR-BA | Adapter for Mink brushes in variable configurations | |
SR-TB | Brush plate Mink incl. adapter SR-BA D= 45 mm L= 90 mm |
|
SR-FA / ESR-FA |
Off-center nozzle with high performance for surfaces. Reduced temperature and pressure at high throughputs. Only for series 1000 L= 210 mm |
|
SR-ND / ESR-ND |
Thin needle jet nozzle with protective cap for small holes and blind holes Minimum pressure 4 bar Outer D= 2.5 mm, L= 90 mm |
|
SR-RT | Rotary table in aluminium Max. load capacity 40 kg D= 300 mm |
|
SR-AU N | Holder for changeable inserts Stainless steel, fits on collector rim L= 400 mm |
|
SR-SM | Grid protection mat, vinyl for model 1000 SR 900 x 600 x 14 mm |
Machine and Large Parts Cleaning
Article No. Standard / Stainless Steel |
Description | Image |
---|---|---|
SR-BSL / ESR-BSL |
Retrofit kit: Spray gun for lance with manual screw connection, 5m spray hose, heat protection and nipple. In stainless steel version fixed tight, without nipple! |
|
SR-DV | Pressure adjuster at the pistol L= 80 mm | |
SR-AD | Adapter from manual screw connection to quick change coupling L= 88 mm |
|
SR-LH SRK-LH |
Bracket for 3 spray lances, mountable at handle of cleaning machine L= 200 mm |
|
SR-LA 600 SR-LA 900 SR-LA 1200 / ESR-LA 600 ESR-LA 900 ESR-LA 1200 |
Spray lance 600 / 900 / 1200 mm as changeable insert with nipple for hand screw coupling and power nozzle. Flat jet 25° In stainless steel version fixed tight, without nipple! |
|
SR-KL 850 SR-KL 1000 SR-KL 1500 |
Push & pull lance 850 / 1000 / 1500 mm incl. nipple for hand screw coupling and power nozzle | |
SR-RTL | Telescopic lance In diverse lengths and diameters, plus nozzles and adapters | |
SR-034E / ESR-034E |
5 m extension hose with quick change coupling and nipple. For cleaning machine and large parts |
Options
1000 SR | 1000 SRE | 1000 SRK | |
---|---|---|---|
Double Power – 14 bar | 1500 SR | 1500 SRE | |
External suction | |||
Stainless steel inside – acid and demineralised water resistent | |||
Thermal disinfection | |||
Temperature control | |||
Tower extension | |||
Macrolon hood | |||
Separate large collector | |||
Stainless steel collector | |||
Dosing pump |
For more information please contact us and also take a look on the download section of our website.